[Packerfavrefan]

I'm still wondering on this one if it is not the sheetmetal.

Some of the cards, the Sheet Metal does sit lower down. Also, most cars are wrapped now with vinyl so a piece of Sheet Metal that has been "rubbed" or wrecked will have a messed up look and little bumpy vinyl feel to it.

I don't know if the adhesive would be 4 colors like that.

As an earlier poster said, have you tried poking or tapping on it with a piece of metal? When you pushed on the front and back of the card, was that piece flexible or stiff?

Worst case, you could try sticking a needle through it from the front and if it goes through - then for sure it is not sheet metal and you could get a replacement from Press Pass.

Ken

I tried pushing on it and it is flexible. I'm afraid to try a pin because I wonder if I send it to Press Pass if they will just add a piece of sheet metal and send it back. I sent a scan to Press Pass to get their opinion so hopefully they get back quickly. I have another damaged card sent to them and I haven't received the replacement yet after 2 months. But they are fast at redemptions. I sent a Dale Jr. like the Harvick and received my card 1 week later.