And here's the other frame I'm working on, this one's a full custom. For one touch cases, and I had a smoking cool idea I'll describe below the pic.
![[Image: DSC_0303_zps8ab07e35.jpg]](http://i72.photobucket.com/albums/i177/Fastbird93/Cases/David%20Baksi%20-%20Dbaks%20on%20Blowout/DSC_0303_zps8ab07e35.jpg)
See the lines right at magnet level for each row? Those are scribe marks for where I'm going to put a thin groove in the back sheet and lay a strip of steel in. This has been tested and will allow the very strong (probably rare earth) magnets in the one touch cases to firmly hold the cards from tipping forward, yet hold softly enough to easily remove from the case.
More to come on this one as it progresses.
![[Image: DSC_0303_zps8ab07e35.jpg]](http://s72.photobucket.com/user/Fastbird93/media/Cases/David%20Baksi%20-%20Dbaks%20on%20Blowout/DSC_0303_zps8ab07e35.jpg.html)
See the lines right at magnet level for each row? Those are scribe marks for where I'm going to put a thin groove in the back sheet and lay a strip of steel in. This has been tested and will allow the very strong (probably rare earth) magnets in the one touch cases to firmly hold the cards from tipping forward, yet hold softly enough to easily remove from the case.
More to come on this one as it progresses.