Since I can't sleep, time for some updates! Finished the inspection/staging board, and finished up a double case.
Inspection board (merged pics, side by side of both sides):
![[Image: InspectionBoard_zps6911cf38.jpg]](http://i72.photobucket.com/albums/i177/Fastbird93/Cases/Gareth%20Miller/InspectionBoard_zps6911cf38.jpg)
Double that went into the mail today. I got lucky, my measurements I was using were VERY accommodating towards PSA cards as well.
![[Image: DSC_0116_zps535097c8.jpg]](http://i72.photobucket.com/albums/i177/Fastbird93/Cases/Brian%20DiBartolomeo/DSC_0116_zps535097c8.jpg)
This is how I ship, I leave the plastic on (where's it's not auto peeling at least) so it's extra protected.
![[Image: DSC_0117_zpsad7e98a5.jpg]](http://i72.photobucket.com/albums/i177/Fastbird93/Cases/Brian%20DiBartolomeo/DSC_0117_zpsad7e98a5.jpg)
Just pulled a three row 21 card case out of the frame clamp on Thursday. It's being finished in gloss black, and I know I said I was going to quit using polyshades, but they were the only ones with a true black. And it goes on SOOOOOOOOO smooth. Pics of that one to come, I'm fixing to sand and prep for stain.
I also have a request that I should start working on tomorrow, a case for one touch holders instead of graded slabs. Trick with that is that I've found the one touch holders have an angled lower surface, so I'm going to have to make an angled cut on the surfaces where the cards sit to combat the natural tendency to tip forward. More to come on that also.
Inspection board (merged pics, side by side of both sides):
![[Image: InspectionBoard_zps6911cf38.jpg]](http://s72.photobucket.com/user/Fastbird93/media/Cases/Gareth%20Miller/InspectionBoard_zps6911cf38.jpg.html)
Double that went into the mail today. I got lucky, my measurements I was using were VERY accommodating towards PSA cards as well.
![[Image: DSC_0116_zps535097c8.jpg]](http://s72.photobucket.com/user/Fastbird93/media/Cases/Brian%20DiBartolomeo/DSC_0116_zps535097c8.jpg.html)
This is how I ship, I leave the plastic on (where's it's not auto peeling at least) so it's extra protected.
![[Image: DSC_0117_zpsad7e98a5.jpg]](http://s72.photobucket.com/user/Fastbird93/media/Cases/Brian%20DiBartolomeo/DSC_0117_zpsad7e98a5.jpg.html)
Just pulled a three row 21 card case out of the frame clamp on Thursday. It's being finished in gloss black, and I know I said I was going to quit using polyshades, but they were the only ones with a true black. And it goes on SOOOOOOOOO smooth. Pics of that one to come, I'm fixing to sand and prep for stain.
I also have a request that I should start working on tomorrow, a case for one touch holders instead of graded slabs. Trick with that is that I've found the one touch holders have an angled lower surface, so I'm going to have to make an angled cut on the surfaces where the cards sit to combat the natural tendency to tip forward. More to come on that also.