So had to get a new frame clamp for the inspections boards. The aluminum one I currently have is too tall and hits the center board. Enter my newfound best friend, the framing strap clamp!
![[Image: DSC_0101_zpsaff26809.jpg]](http://i72.photobucket.com/albums/i177/Fastbird93/Cases/DSC_0101_zpsaff26809.jpg)
And this above and below is the custom inspection board I'm working on. It's NOT glued yet, just mocked up. Figuring how I'm going to tackle assembly with the board pre-covered in the cloth on both sides. Figuring on staining the inside first, assembling, then staining the outer surfaces. But this is a custom request and a really good size for inspecting multiple cards at once.
![[Image: DSC_0102_zpsd1a316ec.jpg]](http://i72.photobucket.com/albums/i177/Fastbird93/Cases/DSC_0102_zpsd1a316ec.jpg)
I also have a two row 14 card case I'm going to start building for another order tonight. No pics there unless requested.
![[Image: DSC_0101_zpsaff26809.jpg]](http://s72.photobucket.com/user/Fastbird93/media/Cases/DSC_0101_zpsaff26809.jpg.html)
And this above and below is the custom inspection board I'm working on. It's NOT glued yet, just mocked up. Figuring how I'm going to tackle assembly with the board pre-covered in the cloth on both sides. Figuring on staining the inside first, assembling, then staining the outer surfaces. But this is a custom request and a really good size for inspecting multiple cards at once.
![[Image: DSC_0102_zpsd1a316ec.jpg]](http://s72.photobucket.com/user/Fastbird93/media/Cases/DSC_0102_zpsd1a316ec.jpg.html)
I also have a two row 14 card case I'm going to start building for another order tonight. No pics there unless requested.