+- Beckett Message Boards (https://www.beckett.com/forums)
+-- Forum: Hobby Talk (https://www.beckett.com/forums/forum-1.html)
+--- Forum: Baseball (https://www.beckett.com/forums/forum-2.html)
+--- Thread: Looking for some advice (/thread-1461935.html)
Pages:
1
2
Looking for some advice - frankie22briguy - 10-14-2011
I joined a case break and I ended up with the number 3 pick. The top 3 cards pulled were Lincecum RC Auto, Matt Ryan 2 patch Auto, and a Michael Bourn 1/1 Printing Plate Auto
The next best cards were a Ryan Braun Auto, Troy Tulowitzki Auto, and a Justin Verlander Auto
If it comes down to me getting the plate should I take the plate or one of the other 3 choices.
Thanks for the input.
Brian
As Promised here is a scan of the Braun
![[Image: IMG_0001-1.jpg]](http://i1135.photobucket.com/albums/m625/frankie22briguy/AU/IMG_0001-1.jpg)
RE: Looking for some advice - sonnyday - 10-14-2011
I would take the Braun Auto over the Plate, I would also take the Verlander Auto over the Printing Plate. In my opinion. The printing plate is probably the 6th best card in this break.
RE: Looking for some advice - phillies816 - 10-14-2011
I would also take the Verlander or Braun over the plate in that order
RE: Looking for some advice - yankees_pride - 10-14-2011
I agree the plate is weak next to the autos. Good Verlander autos are selling like hotcakes right now. And a Braun auto is just nice to have.
RE: Looking for some advice - bustin 5 knots - 10-14-2011
Well it really depends what autos they are, do you have scans of them (or similar cards)?
RE: Looking for some advice - frankie22briguy - 10-14-2011
I went with the Braun auto I don't know if I can post a link to the website they are scanned on but it was a case of 2007 Bowman Best is it was a braun rookie card auto
RE: Looking for some advice - sonnyday - 10-14-2011
Braun rookie auto, good choice.
RE: Looking for some advice - 86champs - 10-14-2011
(10-14-2011, 03:43 PM)frankie22briguy Wrote: I went with the Braun auto
Nice choice. I defiantly would have taken any of the other 3 auto's over the printing plate.
RE: Looking for some advice - cheetos - 10-14-2011
(10-14-2011, 06:47 PM)sonnyday Wrote: Braun rookie auto, good choice.
+1
RE: Looking for some advice - frankie22briguy - 10-14-2011
Thanks I will post scans when it comes in.