(05-25-2012 05:45 AM)evilbread Wrote: Did you try poking it with a pin or a similar metal object to make sure it's not metal? If it's not metal then what is it? You can always send a scan to Press Pass and get their opinion on it as well. They have pretty good customer service. Like someone else said you can send it to Press Pass and they will fix the problem and you may end up with a better card. So if he's offering a partial refund I would take it and then contact Press Pass.
(05-25-2012 10:39 AM)hellsbells Wrote: I'm still wondering on this one if it is not the sheetmetal.
Some of the cards, the Sheet Metal does sit lower down. Also, most cars are wrapped now with vinyl so a piece of Sheet Metal that has been "rubbed" or wrecked will have a messed up look and little bumpy vinyl feel to it.
I don't know if the adhesive would be 4 colors like that.
As an earlier poster said, have you tried poking or tapping on it with a piece of metal? When you pushed on the front and back of the card, was that piece flexible or stiff?
Worst case, you could try sticking a needle through it from the front and if it goes through - then for sure it is not sheet metal and you could get a replacement from Press Pass.