+- Beckett Message Boards (https://www.beckett.com/forums)
+-- Forum: Hobby Talk (https://www.beckett.com/forums/forum-1.html)
+--- Forum: Football (https://www.beckett.com/forums/forum-6.html)
+--- Thread: Whos gonna come!? (/thread-1496264.html)
Pages:
1
2
Whos gonna come!? - chads-cards - 04-15-2012
Robert Morris University, Pa
FRIDAY MAY 18, 2012 4PM - 9PM
SATURDAY MAY 19, 2012 10AM - 6PM
SUNDAY MAY 20, 2012 10AM - 4PM
Heres the Link
http://www.jpaulsports.com/shows.html
I will be there with 3 tables.
LMK if your gonna make it. Its probably my favorite show to go to.
RE: Whos gonna come!? - ripkenfan72 - 04-16-2012
bump for the PA/OH folk
RE: Whos gonna come!? - phinzphan1372 - 04-16-2012
wish i could go! house closing on that weekend! after that my collecting floodgates will be wide open
whats your shops name?.... couldn't find chads cards in the dealer list?RE: Whos gonna come!? - tga8934 - 04-16-2012
I actually may go! And thats my B-day weekend!
RE: Whos gonna come!? - chads-cards - 04-16-2012
(04-16-2012, 05:42 AM)phinzphan1372 Wrote: wish i could go! house closing on that weekend! after that my collecting floodgates will be wide open
Sports-card-junction
This is just our ebay ID name
RE: Whos gonna come!? - jfrench91 - 04-16-2012
i have that weekend off and live in PA.. i might take a day trip down!
RE: Whos gonna come!? - chads-cards - 04-16-2012
(04-16-2012, 12:11 PM)jfrench91 Wrote: i have that weekend off and live in PA.. i might take a day trip down!
pittsburgh sports will be there with alot of wax and there will be about 250 dealer tables
RE: Whos gonna come!? - superynaldo - 04-16-2012
I won't, but keep an eye out for any Shipley 1/1's ok...
RE: Whos gonna come!? - chads-cards - 04-16-2012
(04-16-2012, 12:39 PM)superynaldo Wrote: I won't, but keep an eye out for any Shipley 1/1's ok...
What are you looking to pay on plain base 1/1's and plates
And then on higher end ones since I will most likely not be able to ask you
RE: Whos gonna come!? - superynaldo - 04-16-2012
(04-16-2012, 12:44 PM)chads-cards Wrote: What are you looking to pay on plain base 1/1's and plates
And then on higher end ones since I will most likely not be able to ask you
1/1's I have been scoring anywhere from $20 and up pending type... plates especially $20 or so... if they are harder to get versions, IE: letterman, etc, $75 and up is where I have been getting them mostly... even a few at $50...
thanks !!!